[. . . ] ????????????????????????????? 2 CAUTION ? Before using the stand, please thoroughly read the following instructions and the Owner?s Manual. Placing the stand on uneven surfaces such as uneven flooring or stairs may cause the stand to become unstable or overturn. ? [MTS-410A] When attaching/removing the instrument, do not push/pull on the tom holder frame alone (this is dangerous! [. . . ] * The directions of the legs to be spreaded should be done according to the diagram on the right. Adjust the arms of the stand to match the space between the two pivots of the multi tom carrier. Adjust the arms to the pivot positions and insert them firmly and completely. Adjust the height of the multi toms by moving the upper stand up and down and fasten it with wing bolt (B), then fasten the screw of the position clamp with a drum key. Spread the legs of the stand and secure them by tightening wing bolt (A). ? When the toms are attached to the stand, the holder can be removed. * Position the feet and the catcher as shown in the illustration below. Align the frame of the multi tom holder with the catcher on the stand and insert the holder until it stops. the upper pipe, and re-tighten wing bolt (B) securely after adjustment. Furthermore, to prevent the toms from slipping down during performance, push the position clamp against the mounting base and securely tighten its screw using a drum key. Loosen wing bolt (B) to adjust the height of the drum-heads by raising or lowering ?/Drum Mouning Illustrations ??????????????????????????????????????????Please refer to the following illustrations when mounting your bass drum on the stand. For all MB-4000 or 400 series drum sizes * To mount a MB-4000 or 400 series bass drum, the arm mounting position needs to be changed. Attach the four arms at the inner holes of the stand, referring to the illustration below. Fully spread the legs of the stand and secure them by tightening wing bolt (A). * Position the legs and the arm base as shown in the illustration (left). The proper arm base direction and arm mounting position depend on the size of the bass drum. [. . . ] * Position the legs and the arm base as shown in the illustration (left). The proper arm base direction and arm mounting position depend on the kind and the size of the drum. Refer to the drum mounting illustrations (left) for proper setting of the drum stand. [. . . ]